| C. I. Pigment: | Yellow 53 | C. I. NO.: | 77788 |
The 2152 is a lemon yellow powder produced by solid state reactions at a very high temperature. It is lightfast, alkali resistant, acid resistant, heat resistant and weather resistant. It complies with ASTM C979 (Pigments for Integrally Colored Concrete).
The 2152 can be used in markets for the coloration of concrete, grout, stucco, roofing tiles, pavers, block, pre-cast and segmental retaining wall units. Its high temperature stability makes it suitable for coloring ceramics, glass enamels and glazes. It is compatible with all stains and glazes.
Additional uses can be found in various industrial baking and air-dry coatings and plastics applications. The 2152 is also FDA approved for use in polymeric food contact articles regulated under the Code of Federal Regulations, 21 CFR Part 178.3297 Colorants for Polymers with limitations as described therein.
Typical Chemical & Physical Properties |
||||||||||||||||||||||||
|
Some of the values for chemical and physical properties are provided for general information only. They are approximate values for reference and not specifications utilized in the quality control procedures for color and consistency.
LIMITED WARRANTY: Seller warrants that its products are free from manufacturing defects. The Seller makes no other warranty beyond that contained in this writing. DISCLAIMER OF OTHER WARRANTIES: NO OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY. DISCLAIMER OF LIABILITY FOR RELIANCE ON INFORMATION PROVIDED BY THE SELLER: The information contained herein is true and accurate to the best of our knowledge, but is provided without warranty or guarantee. Since the conditions of use are beyond our control, Seller disclaims all liability and assumes no legal responsibility for damages resulting from use of or reliance upon the information contained herein. Seller strongly recommends careful screening/testing before using its products in production. TIME LIMIT FOR BRINGING SUIT: All suits must be commenced within one-year from the date on which the product at issue is delivered to Buyer.
