Products

Inorganic Pigments

Ultramarine Blue

UPL-A105 Ultramarine Blue

C. I. Pigment:

Blue 29

C. I. NO.:

77007

 

---

Description

UPL-A105 is a medium green shade ultramarine blue with good alkali resistance.

Applications

UPL-A105 is recommended for use in coatings and plastics.  UPL-A105 is FDA approved (Section 178.3297).

Typical Chemical & Physical Properties

Appearance   Blue Powder Tap Density (g/cc)   0.50 - 0.80 Specific Gravity (g/cm3)   ~ 2.35 Moisture Content (max)   1.0% Water Soluble Matter (max)   1.0% Free Sulphur (ppm by wt.) (Max)   200 Oil Absorbtion (% by wt.)   35.0 - 37.0 Average Particle Size (microns)   1.8 Residue on 45 micron sieve (% by wt.)   0.2 Heat Resistance   350°C Lightfastness - Masstone (1-8)   7 - 8 Lightfastness - Reduced Tone (1-8)   7 - 8 Acid Resistance    Poor Alkali Resistance   Good

Request Sample

LIMITED WARRANTY: Seller warrants that its products are free from manufacturing defects. The Seller makes no other warranty beyond that contained in this writing. DISCLAIMER OF OTHER WARRANTIES: NO OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY. DISCLAIMER OF LIABILITY FOR RELIANCE ON INFORMATION PROVIDED BY THE SELLER: The information contained herein is true and accurate to the best of our knowledge, but is provided without warranty or guarantee. Since the conditions of use are beyond our control, Seller disclaims all liability and assumes no legal responsibility for damages resulting from use of or reliance upon the information contained herein. Seller strongly recommends careful screening/testing before using its products in production. TIME LIMIT FOR BRINGING SUIT: All suits must be commenced within one-year from the date on which the product at issue is delivered to Buyer.

Return