| C. I. Pigment: | Blue 15:0 | C. I. NO.: | 74160 |
8000N is an alpha crystal form (solvent unstable) crystallizing red shade phthalocyanine blue. 8000N is greener in shade than our 5561. FDA approved (Section 178.3297).
8000N is recommended for low temperature plastics, aqueous dispersions, water flexo inks and textiles. 8000N exhibits good tinting strength in most applications.
Typical Physical Properties |
Bleed Characteristics |
|||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
Lightfastness (1 - 8) |
Chemical Resistance (1 - 5) |
|||||||||||||||||||||||||||
|
|
Heat Stability - Inks |
Heat Stability - Plastics |
Heat Stability - Coatings |
| -- |
(HDPE - 5 min) 390°F |
(Baking Alkyd - 30 min) 300°F |
LIMITED WARRANTY: Seller warrants that its products are free from manufacturing defects. The Seller makes no other warranty beyond that contained in this writing. DISCLAIMER OF OTHER WARRANTIES: NO OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY. DISCLAIMER OF LIABILITY FOR RELIANCE ON INFORMATION PROVIDED BY THE SELLER: The information contained herein is true and accurate to the best of our knowledge, but is provided without warranty or guarantee. Since the conditions of use are beyond our control, Seller disclaims all liability and assumes no legal responsibility for damages resulting from use of or reliance upon the information contained herein. Seller strongly recommends careful screening/testing before using its products in production. TIME LIMIT FOR BRINGING SUIT: All suits must be commenced within one-year from the date on which the product at issue is delivered to Buyer.
