| C. I. Pigment: | Red 184 | C. I. NO.: | 12487 |
1184 is a blue shade semi-transparent napthol red with good overall fastness properties. 1187 is an alternative to Pigment Red 57:1 types where an improvement in fastness properties is needed. It is a Rubine process printing shade.
1184 is recommended for paste inks, solvent and water based packaging gravure, flexographic and metal deco printing inks. Additional uses can be found in the coatings industry for interior industrial finishes and emulsion paints.
Typical Physical Properties |
Bleed Characteristics |
|||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
Lightfastness (1 - 8) |
Chemical Resistance (1 - 5) |
|||||||||||||||||||||||||||
|
|
Heat Stability - Inks |
Heat Stability - Plastics |
Heat Stability - Coatings |
|
(Metal Deco - 30 min) 320°F |
-- |
(Baking Alkyd - 30 min) 350°F |
LIMITED WARRANTY: Seller warrants that its products are free from manufacturing defects. The Seller makes no other warranty beyond that contained in this writing. DISCLAIMER OF OTHER WARRANTIES: NO OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY. DISCLAIMER OF LIABILITY FOR RELIANCE ON INFORMATION PROVIDED BY THE SELLER: The information contained herein is true and accurate to the best of our knowledge, but is provided without warranty or guarantee. Since the conditions of use are beyond our control, Seller disclaims all liability and assumes no legal responsibility for damages resulting from use of or reliance upon the information contained herein. Seller strongly recommends careful screening/testing before using its products in production. TIME LIMIT FOR BRINGING SUIT: All suits must be commenced within one-year from the date on which the product at issue is delivered to Buyer.
