Yellow
2162 Azo Yellow 62
| C. I. Pigment: |
Yellow 62 |
|
C. I. NO.: |
13940 |
Description
2162 is an azo yellow calcium precipated pigment with good lightfastness, chemical resistance and heat stability.
Applications
2162 can be widely used in various plastic applications such as plasticized and rigid PVC, PP, LDPE, HDPE and for the coloration of rubber articles. Other potential suitable uses may also be found in polystyrenes, ABS and for Powder Coatings.
Typical Physical Properties
|
Bleed Characteristics
|
| pH (10% Aqueous Slurry) |
|
6.0 - 8.0 |
| Moisture Content % |
|
< 2.0% |
| Oil Absorption (g oil/100g) |
|
~ 48 |
| Specific Gravity (g/cm3) |
|
~ 1.60 |
|
| Xylene |
|
3 - 4 |
| Ethanol |
|
3 |
| Lacquer Solvents |
|
3 |
| Mineral Spirits |
|
4 |
| Water |
|
5 |
| |
|
|
|
Lightfastness (1 - 8)
|
Chemical Resistance (1 - 5)
|
|
|
|
Heat Stability - Inks
|
Heat Stability - Plastics
|
Heat Stability - Coatings
|
| -- |
500°F |
-- |
Request Sample
LIMITED WARRANTY: Seller warrants that its products are free from manufacturing defects. The Seller makes no other warranty beyond that contained in this writing. DISCLAIMER OF OTHER WARRANTIES: NO OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY. DISCLAIMER OF LIABILITY FOR RELIANCE ON INFORMATION PROVIDED BY THE SELLER: The information contained herein is true and accurate to the best of our knowledge, but is provided without warranty or guarantee. Since the conditions of use are beyond our control, Seller disclaims all liability and assumes no legal responsibility for damages resulting from use of or reliance upon the information contained herein. Seller strongly recommends careful screening/testing before using its products in production. TIME LIMIT FOR BRINGING SUIT: All suits must be commenced within one-year from the date on which the product at issue is delivered to Buyer.
Return
