Yellow
2183-A Azo Yellow 183
| C. I. Pigment: |
Yellow 183 |
|
C. I. NO.: |
18792 |
Description
2183-A is a non-warping red shade yellow with excellent heat stability recommended for plastics applications. FDA approved (Section 178.3297).
Applications
2183-A is recommended for use in a wide range of plastics including: Polyolefins, PS, PET, PVC, PUR, SB, SAN, ABS/ASA, CA/CAB.
Typical Physical Properties
|
Bleed Characteristics
|
| pH (10% Aqueous Slurry) |
|
5.0 - 7.5 |
| Moisture Content % |
|
< 2.0% |
| Specific Gravity (g/cm3) |
|
~ 1.80 |
|
|
|
|
| Xylene |
|
5 |
| Ethanol |
|
5 |
| Ethyl Acetate |
|
4 - 5 |
| Mineral Spirits |
|
5 |
|
Lightfastness (1 - 8)
|
Chemical Resistance (1 - 5)
|
|
|
|
Heat Stability - Inks
|
Heat Stability - Plastics
|
Heat Stability - Coatings
|
| -- |
570°F |
-- |
Request Sample
LIMITED WARRANTY: Seller warrants that its products are free from manufacturing defects. The Seller makes no other warranty beyond that contained in this writing. DISCLAIMER OF OTHER WARRANTIES: NO OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY. DISCLAIMER OF LIABILITY FOR RELIANCE ON INFORMATION PROVIDED BY THE SELLER: The information contained herein is true and accurate to the best of our knowledge, but is provided without warranty or guarantee. Since the conditions of use are beyond our control, Seller disclaims all liability and assumes no legal responsibility for damages resulting from use of or reliance upon the information contained herein. Seller strongly recommends careful screening/testing before using its products in production. TIME LIMIT FOR BRINGING SUIT: All suits must be commenced within one-year from the date on which the product at issue is delivered to Buyer.
Return
