| C. I. Pigment: | Yellow 138 | C. I. NO.: | 56300 |
2338 is an FDA approved green shade yellow with very good heat stability, light and weatherfastness.
2338 is recommended for a wide range of plastics including: Polyolefins, PS, PET, PVC, engineering plastics as well as spin dyeing. Additional uses can be found in industrial applications, OEM and automotive refinishes. FDA approved (Section 178.3297).
Typical Physical Properties |
Bleed Characteristics |
||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||
Lightfastness (1 - 8) |
Chemical Resistance (1 - 5) |
||||||||||||||||||||||||||||||
|
|
Heat Stability - Inks |
Heat Stability - Plastics |
Heat Stability - Coatings |
| -- |
(HDPE - 5 Min) 570°F |
390°F |
LIMITED WARRANTY: Seller warrants that its products are free from manufacturing defects. The Seller makes no other warranty beyond that contained in this writing. DISCLAIMER OF OTHER WARRANTIES: NO OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY. DISCLAIMER OF LIABILITY FOR RELIANCE ON INFORMATION PROVIDED BY THE SELLER: The information contained herein is true and accurate to the best of our knowledge, but is provided without warranty or guarantee. Since the conditions of use are beyond our control, Seller disclaims all liability and assumes no legal responsibility for damages resulting from use of or reliance upon the information contained herein. Seller strongly recommends careful screening/testing before using its products in production. TIME LIMIT FOR BRINGING SUIT: All suits must be commenced within one-year from the date on which the product at issue is delivered to Buyer.
