 |
|
Inorganic Pigments |
I = Inks, C= Coatings, P = Plastics
|
| MILORI & ULTRAMARINE BLUE |
Back to top |
| CHROME YELLOW |
| REGULAR GRADES |
A-241 Chrome Yellow Primrose (C,P)
A clean, high-strength, green shade chrome yellowpigment for coatings and low temperature plastics. |
A-451-FM Chrome Yellow Primrose (C,P)
Easier dispersing, green shade chrome yellow pigment suggested for low temperature plastics andcoatings. |
A-511-FM Chrome Yellow Light (C,P)
An easy dispersing light shade chrome yellow withgood strength. |
7-EX Chrome Yellow Light (C,P)
Easy dispersing, light chrome yellow pigment with
excellent strength and hiding power. Suggested forlow temperature plastics and coatings. |
G-EX Chrome Yellow Medium (C,P)
Easy dispersing, medium chrome yellow pigment,
the reddest shade, with excellent strength and
hiding power. Suggested for low temperatureplastics and coatings. |
A-765-ED Chrome Yellow Medium (C,P)
Easy dispersing chrome yellow pigment with good
strength recommended for traffic coatings as well as low temperature plastics. |
| ENCAPSULATED GRADES |
2592 Hi-Temp. Chrome Yellow, Primrose (C,P)
A very clean, green shade primrose yellow with good strength and opacity recommended for higher temperature plastics or coatings in which acidresistance is necessary. |
2593 Hi-Temp. Chrome Yellow, Light (C,P)
A light chrome yellow with good strength and opacity recommended for higher temperature
plastics or coatings in which acid resistance is necessary. |
2594 Hi-Temp. Chrome Yel, Med (C,P)
A red shade medium chrome yellow with good strength and opacity recommended for high
temperature plastic, thermoplastic road markings,
and coatings in which acid resistance is necessary. |
Back to top |
| MOLYBDATE ORANGE |
| REGULAR GRADES |
RS-132-EX Molybdate Orange, Red Shade (C,P)
A red shade molybdate with good strength, bright
color and good opacity. Recommended for low
temperature plastics and coatings. |
NM-33-FM Molybdate Orange, Yellow Shade (C,P)
A yellow shade molybdate with high strength, bright color and excellent opacity. Recommended for low temperature plastics and coatings. |
NM-37-FM Molybdate Orange, Red Shade (C,P)
A red shade molybdate with good strength, bright
color and good opacity. Recommended for low
temperature plastics and coatings. |
| ENCAPSULATED GRADES |
2695 Hi-Temp Moly Orange Y.S. (C,P)
A yellow shade molybdate orange with bright color,
good strength and opacity recommended for higher temperature plastics and coatings in which acid
resistance is necessary. |
2696 Hi-Temp Moly Orange, R.S. (C,P)
A red shade molybdate with good strength and
opacity recommended for higher temperature
plastics and coatings in which acid resistance is necessary. |
Back to top |
| CHROMIUM OXIDE GREEN |
| Chromium Oxide Green pigments are very stable green pigments which are unaffected by acids,
alkalis and solvents. They are heat stable and offer
excellent value, lightfastness and weatherability. |
301 Chromium Oxide Green Light (C,P)
A high quality clean yellow shade intended mainlyThey offer a good combination of reflectivity and for coatings. |
305 Chromium Oxide Green Medium (C,P)
A high quality clean medium shade intended mainly
for coatings. |
329-A Chromium Oxide Green Medium (C)
A high quality clean light to medium shade mainly
intended for coatings. |
361 Chromium Oxide Green Dark ED (C,P)
A dark shade that has been surface treated to improve dispersibility. Mainly intended for
architectural applications. |
385 IR Camouflage Chromium Oxide Green(C,P)
A dark shade, especially manufactured for use in
military and camouflage applications requiring highreflectivity in the infrared range.
|
Back to top |
| ALUMINUM PASTE |
LANSCO Aluminum Pastes are manufactured by Carlfors Bruk of Huskvarna, Sweden, a 100 year old, ISO 9001 certified company. Their Aluminum Pastes are world renowned for high leafing values and unsurpassed brilliance. Their automated factory produces pastes with outstanding lot to lot consistency.
LEAFING |
7081- 65% Leafing Aluminum Paste
These pastes are of medium fineness and are
ideally suited for trade and maintenance coatings.
They offer a good combination of reflectivity and hiding. Meets ASTM D962-II, B |
7054 - 73% Leafing Aluminum Paste
These pastes are of medium fineness and are
ideally suited for trade and maintenance coatings. They offer a good combination of reflectivity and hiding. Meets ASTM D962-II, B |
7058 - 65% Extra Fine Aluminum Paste
This extra fine paste is popular in aerosol paintformulations. Meets ASTM D962-II,A |
7075 - 65% Leafing Aluminum Paste
These coarse pastes are widely used in asphalt-based roof coatings. They offer extremely high leafing value and brightness. Meets ASTM D962-
IV, C |
7076 - 70% Leafing Aluminum Paste
These coarse pastes are widely used in asphalt-based roof coatings, offering extremely high leafing value and brightness. Meets ASTM D962-IV, C |
| NON-LEAFING |
7053-CB - 65% Non-leafing Aluminum Paste
Meets ASTM D962-IV,B |
7056-CB - 65% Extra Fine Non-leafing
Aluminum Paste
Unlike leafing aluminum paste, these non-leafing pastes orient their particles throughout the coating film. They mix well with color pigments and offer a uniform surface film with good hiding and an outstanding barrier protection in multi-coat systems.
Meets ASTM D962-IV,A |
| PLASTIC GRADES (Available in a variety of solvents – ask your LANSCO representative) |
7088 Aluminum Paste
80% in Parrafin Oil. This plastic grade is an excellent low cost alternative to aluminum "pellets". Widely used in color concentrates for film and other
applications. |
Back to top |
| ANTI-CORROSIVE PIGMENTS |
236 Zinc Phosphate (C)
An easy dispersing, non-toxic zinc phosphate
tetrahydrate-based product with excellent performance in outdoor durability. |
243-XF Zinc Chromate ED (C)
Extra fine, fully micronized for easy dispersing, excellent outdoor durability. |
264 Basic Zinc Chromate (C)
Micronized, easy dispersing. Used in preconditioning wash primers for metals with excellent outdoor
durability. |
263 WACOR ZBP-M (C)
Borate Modified Zinc Phosphate. Non-Toxic for
corrosion inhibitive paints. Designed with a
controlled solubility in order to achieve a fast and
long lasting protection. Excellent saltspray and outdoor tests in many systems. |
234 Zinc Borate (C)
Non-toxic, anticorrosive pigment with flame
retardant, smoke suppressing and fungicidal
properties, for water systems. |
289 WACOR ZBA (C)
Borate modified, aluminized Zinc Phosphate. Nontoxic, double modified with borate for corrosion
inhibitive paints, excellent in high solids, low VOC epoxy. |
275-XF Strontium Chromate E.D. (C)
Excellent corrosion inhibitor, used in preconditioning wash primers for metalized finishes and vinyl sheeting. |
Back to top |
| TITANIUM DIOXIDE |
8001 Rutile Titanium Dioxide (I,C,P)
Our most economical rutile grade of titanium
without any surface treatment. 8001 can be used in primers, plastics, inks, and colored formulations in
industrial paints and in other applications where a sulfate process titanium dioxide is suitable. |
8086-A Rutile Titanium Dioxide (I,C,P)
A low-cost sulfate process rutile Titanium Dioxide
with good hiding power recommended for use in
plastics, industrial paints, paper coatings, and
rubber. Surface treated with alumina, silica and organic to improve dispersibility and durability. NOTE: Primarily for the West Coast. |
CR-03 Rutile Titanium Dioxide (I,C,P)
A low-cost sulfate process rutile Titanium Dioxide
with good hiding power recommended for use in plastics, industrial paints, paper coatings, and rubber. Surface treated with alumina and silica to improve dispersibility and durability. Slightly bluer and higher gloss when compared to 8086-A. NOTE: Primarily for the East Coast. |
RC-800-PG Rutile Titanium Dioxide (I,C,P)
A high quality chloride process rutile titanium dioxide. It has a bluish color, high tinting strength, low oil absorption, and excellent dispersion properties. RC-800PG finds applications in plastics requiring a
blue-white titanium dioxide that disperses easily.
Other areas of application include powder coatings,
polyethylene films and vinyl sheet goods. |
|
Back to top |
| CARBON BLACKS |
410 Carbon Black (C,P)
Smaller particle size low cost granular carbon
black. The most jet of our low cost carbon blacks
but with the highest viscosity. Particularly good for
plastics requiring excellent UV properties. |
461 Carbon Black (C)
A blue tone black powder in which a coarser
particle allows medium viscosity and good
flocculation/flood resistance for use in coatings. |
462 Carbon Black (C,P)
A blue tone black powder which is easy dispersing
with low oil absorption. Suggested for plastics,
master-batches and paint coloring or tinting. |
463 Carbon Black (C,P)
A bluer tone black powder primarily used in
coatings applications for coloring of paint and
tinting. |
490-P Extra Strong Jet Black (Misc)
A specially formulated black suggested for
waterborne applications such as roofing granules
and concrete mortar. |
4032 Carbon Black (C,P)
Medium particle size low cost granular carbon black
intended primarily for plastics and water
dispersions. Medium viscosity and jetness. |
4076 Carbon Black (C,P)
Large particle size, low cost granular carbon black
that is less jet and lowest in viscosity. Good for
tinting systems. A gas fired channel black that can
be used where an FDA black is required. |
|
Back to top |
|
|